Phantomdrive Firmware Updater

Download firmware from the Phantomdrive releases.

Windows setup

The WCH bootloader must use the WinUSB driver before Chrome or Edge can access it. This is required once per computer:

Download and run Zadig.
In Zadig, select Options > List All Devices.
Hold SW1 while inserting Phantomdrive.
Select USB Module with USB ID 4348:55e0.
Select WinUSB, then click Install Driver or Replace Driver.
Return to the firmware updater and click Choose BIN to select the firmware file.
Reinsert Phantomdrive while holding SW1.
Click Connect, select Unknown device from WinChipHead, then click Connect again.
Click Flash Firmware.

The bootloader exits after approximately ten seconds. If it disappears while using Zadig, leave Zadig open and reinsert Phantomdrive while holding SW1.

Linux setup

sudo tee /etc/udev/rules.d/70-phantomdrive-webusb.rules >/dev/null << 'EOF'
ACTION!="remove", SUBSYSTEM=="usb", ATTR{idVendor}=="4348", ATTR{idProduct}=="55e0", MODE="0660", TAG+="uaccess"
EOF

sudo udevadm control --reload-rules

SD-card formatting, passwords, and hidden-partition setup are not required for firmware updates.

Firmware BIN

No BIN selected

Choose BIN

Bootloader

Not connected

Program

Firmware is verified, then the device resets automatically.

Waiting for device and firmware